If you cannot find anything that addresses your concerns, please contact us to see how we can help.
All NIOSH Health Hazard Evaluation reports and other NIOSH publications are available at no cost.
You can either download a copy of the publication from the website or contact us for a copy.
For HHE reports, please send an email to HHERequestHelp@cdc.gov.
Information about all other NIOSH publications is available at https://www.cdc.gov/niosh/pubs/.
We carefully review our reports prior to publication, but we do make errors from time to time.
We regret any typographical or other minor errors that you might find. If you find a substantive factual or data-related error, let us know.
Please send an email to HHERequestHelp@cdc.gov with the report number (ex. HHE 2013-0500-7500),
the authors' names, the error you are reporting, and the page number of the error. We will look into your comments,
fix confirmed errors, and repost the report. Thank you for your interest in the HHE Program.
HHE Search Results
471 HHE reports were found based on your search terms. Reports are listed in order of year published with the most recently published reports listed first.
Year Published and Title
(1990) Peerless Alloy, Inc., Denver, Colorado. (Click to open report) In response to a request from the management of Peerless Alloy Inc., in Denver, Colorado, an evaluation was made of possible lead (7439921) exposure at this facility. Workers at the facility produced lead alloys and lead tubing. The alloy shop and the oil press extrusion shop were located in separate areas of the facility. Personal protective equipment included respirators and work coveralls. A local physician provided blood analyses for lead exposure monitoring every 6 months or every month, de... (Click to show more)In response to a request from the management of Peerless Alloy Inc., in Denver, Colorado, an evaluation was made of possible lead (7439921) exposure at this facility. Workers at the facility produced lead alloys and lead tubing. The alloy shop and the oil press extrusion shop were located in separate areas of the facility. Personal protective equipment included respirators and work coveralls. A local physician provided blood analyses for lead exposure monitoring every 6 months or every month, depending on exposure levels. Personal breathing samples were collected for all the workers. Trace levels of several metals were found, but only lead levels exceeded allowable limits, ranging from 0.002 to weeks prior to the survey indicated levels ranging from 5 to 63 micrograms/10 grams whole blood. None of the workers experienced any health problems linked to lead exposure. Several areas which had been out of compliance with OSHA standards during an earlier investigation had been improved. The authors conclude that a potential health hazard existed from exposure to lead in the lead furnace areas. The authors recommend specific measures concerning air monitoring, respiratory protection, personal protective clothing, hygiene facilities and practices, medical monitoring, and ventilation.
(Click to show less) (Click to open report)
(1990) Sims Radiator Shop, Chamblee, Georgia. (Click to open report) In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714) located in Chamblee, Georgia. The shop employees six workers involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for the four mechanics were 220, 90, 50, and 30 micrograms per cubic meter (microg/m3). Three of these levels were at or above the OSHA 50microg/m3 per... (Click to show more)In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714) located in Chamblee, Georgia. The shop employees six workers involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for the four mechanics were 220, 90, 50, and 30 micrograms per cubic meter (microg/m3). Three of these levels were at or above the OSHA 50microg/m3 permissible exposure limit. All six employees participated in a medical evaluation. The blood lead levels of the mechanics were 41, 33, 32, and 13 micrograms per deciliter (microg/dl). The blood lead levels of the two delivery personnel were 21 and 14microg/dl. One mechanic had a blood lead level over the 40microg/dl limit which requires that blood be tested every 2 months. None of the employees had elevated free erythrocyte protoporphyrin concentrations. None had any physical symptoms suggestive of lead intoxication. The authors conclude that a health hazard existed from overexposure to lead. The authors provide recommendations to prevent lead overexposures, and develop an environmental and medical program in compliance with the OSHA lead standard.
(Click to show less) (Click to open report)
(1990) Sims Radiator Shop, Conyers, Georgia. (Click to open report) In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714), Conyers, Georgia. The shop employed three workers, two of whom were mechanics, involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for the two mechanics were 80 and 60 micrograms per cubic meter (microg/m3), both above the OSHA permissible exposure limit of 50mic... (Click to show more)In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714), Conyers, Georgia. The shop employed three workers, two of whom were mechanics, involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for the two mechanics were 80 and 60 micrograms per cubic meter (microg/m3), both above the OSHA permissible exposure limit of 50microg/m3. The blood lead levels of the two mechanics were 30 and 37 micrograms per deciliter (microg/dl), both of which were below the 40microg/dl level which requires mandatory testing every 2 months. None of the employees had elevated free erythrocyte protoporphyrin concentrations or any physical symptoms suggestive of lead intoxication. The authors conclude that a potential health hazard existed from overexposures to lead. The authors recommend that activities required by the OSHA lead standard should be carried out to assist in eliminating this hazard. Local exhaust ventilation should be installed at the source of lead fume generation.
(Click to show less) (Click to open report)
(1990) Sims Radiator Shop, Decatur, Georgia. (Click to open report) In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714), Decatur, Georgia. The shop employees seven workers, five of whom are mechanics, involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for four of the mechanics were 50, 30, 20, and 10 micrograms per cubic meter (microg/m3). One of these was at the OSHA permissible ... (Click to show more)In response to a request from the owner, an investigation was undertaken of possible hazardous working conditions at the Sims Radiator Shop (SIC-3714), Decatur, Georgia. The shop employees seven workers, five of whom are mechanics, involved in the cleaning and repairing of automobile and truck radiators. The 8 hour time weighted average lead (7439921) concentrations for four of the mechanics were 50, 30, 20, and 10 micrograms per cubic meter (microg/m3). One of these was at the OSHA permissible exposure limit of 50microg/m3. All seven employees participated in a medical evaluation. The blood lead levels of the mechanics were 64, 46, 30, 28, and 23 micrograms per deciliter (microg/dl) and the blood lead levels of the two delivery personnel were 17 and 18microg/dl. One mechanic had a blood lead level over the 40microg/dl limit requiring that blood tests be performed every 2 months and one had a level over 50microg/dl requiring his removal from the area where the airborne lead exceeded 30microg/m3. The two mechanics with elevated blood lead levels also had elevated free erythrocyte protoporphyrin levels (155 and 70microg/dl, respectively). None of the shop employees had any physical symptoms suggestive of lead intoxication. The authors conclude that a health hazard existed from overexposure to lead. The authors recommend that the provisions of the OSHA lead standard should be implemented to protect the workers.
(Click to show less) (Click to open report)
(1990) Sims Radiator Shop, Lawrenceville, Georgia. (Click to open report) In response to a request from Sims Radiator Shop (SIC-3714), Lawrenceville, Georgia, an investigation was made regarding possible exposures to hazardous substances on the job. The shop cleaned and repaired automobile and truck radiators. Five people were employed at the site: three mechanics, a manager and a delivery person. The 8 hour time weighted average personal breathing zone lead concentrations for the three mechanics were 60, 50, and 20 micrograms/cubic meter (microg/m3), two of which wer... (Click to show more)In response to a request from Sims Radiator Shop (SIC-3714), Lawrenceville, Georgia, an investigation was made regarding possible exposures to hazardous substances on the job. The shop cleaned and repaired automobile and truck radiators. Five people were employed at the site: three mechanics, a manager and a delivery person. The 8 hour time weighted average personal breathing zone lead concentrations for the three mechanics were 60, 50, and 20 micrograms/cubic meter (microg/m3), two of which were at or above the OSHA permissible exposure limit of 50microg/m3. The blood lead levels for the mechanics were 33, 26, and 13 micrograms per deciliter and the blood lead level of the delivery person was 11 micrograms/deciliter. None of these levels was above the level which OSHA has set for mandatory testing every 2 months. No employee had elevated free erythrocyte protoporphyrin concentrations. None had any signs or symptoms suggestive of lead poisoning. The authors conclude that a potential health hazard existed from exposure to lead during routine cleaning and repair of radiators. The authors recommend specific measures to eliminate this hazard, including personal protective equipment, monitoring, housekeeping, hygiene practices, medical surveillance, and written compliance reports.
(Click to show less) (Click to open report)
(1990) TAMCO, Etiwanda, California. (Click to open report) In response to a request for a health hazard evaluation at TAMCO (SIC-3312), Etiwanda, California, an onsite visit was conducted with specific attention directed toward the continuous casting minimill which produced steel reinforcing bar and rod from scrap steel. Twenty workers had full shift air lead (7439921) levels ranging from less than 3 to 31 micrograms/cubic meter (microg/m3). All were below the OSHA action level of 30microg/m3 except one worker who was relining ladels with refractory mat... (Click to show more)In response to a request for a health hazard evaluation at TAMCO (SIC-3312), Etiwanda, California, an onsite visit was conducted with specific attention directed toward the continuous casting minimill which produced steel reinforcing bar and rod from scrap steel. Twenty workers had full shift air lead (7439921) levels ranging from less than 3 to 31 micrograms/cubic meter (microg/m3). All were below the OSHA action level of 30microg/m3 except one worker who was relining ladels with refractory material. Blood lead levels were below levels known to cause adverse health effects in adults. Levels for other metals were below allowable limits and no health hazard was found to exist. The authors conclude that a health hazard did not exist from exposure to lead. There was a potential cancer risk from exposure to components of welding fumes and melt shop dust. The authors recommend measures to reduce exposures to nickel (7440020), arsenic (7440382), and cadmium (7440439). These included periodic monitoring of airborne lead and the use of respiratory protective equipment.
(Click to show less) (Click to open report)
(1990) Thomson Consumer Electronics, Inc., Circleville, Ohio. (Click to open report) In response to a request from Thomson Consumer Electronics (SIC- 3229), Circleville, Ohio and the International Brotherhood of Electrical Workers, an investigation was made to determine if cancers among workers were occupationally related. The company manufactured glass panels and funnels used in the production of television picture tubes. The facility employed about 560 persons and operated 24 hours a day, 7 days a week, on a four shift schedule. Airborne concentrations of coal-tar-pitch volati... (Click to show more)In response to a request from Thomson Consumer Electronics (SIC- 3229), Circleville, Ohio and the International Brotherhood of Electrical Workers, an investigation was made to determine if cancers among workers were occupationally related. The company manufactured glass panels and funnels used in the production of television picture tubes. The facility employed about 560 persons and operated 24 hours a day, 7 days a week, on a four shift schedule. Airborne concentrations of coal-tar-pitch volatiles (CTPV) ranged from nondetectable to 0.19mg/m3. Only one of the three general area air samples had a detectable concentration, recommended exposure limit of 0.1mg/m3 and one area sample exceeded the OSHA permissible exposure limit of 0.2mg/m3. Trace levels of four polynuclear aromatic hydrocarbons were detected. Lead (7439921) exposure was monitored for furnace operators, the ware handlers and the inspector/packers. The results ranged from nondetectable to 248 micrograms/cubic meter. Seven bulk settled dust samples were collected for asbestos (1332214) identification. The amounts of chrysotile (12001295) present ranged from 1 to 20%. The authors conclude that there was insufficient evidence to link the cancers and illnesses present in the work force with occupational exposures. Health hazards existed from exposure to coal-tar-pitch volatiles and lead among press operators and ware handlers, respectively. The chrysotile levels were high enough that abatement measures were warranted.
(Click to show less) (Click to open report)
(1990) U.S. Department of Justice, United States Marshals Service, Washington, D.C. (Click to open report) In response to a request from the United States Marshals Service (SIC-9221) in Washington, D.C. for assistance in testing the effect of renovations to the ventilation system of their indoor firing range, lead (7439921) exposures were measured during handgun qualifying sessions. Each qualifying session of firing consisted of 60 rounds fired in 10 to 12 minutes. Personal breathing zone air samples were taken from three shooters and the range officer. Lead exposure concentrations measured were 2073... (Click to show more)In response to a request from the United States Marshals Service (SIC-9221) in Washington, D.C. for assistance in testing the effect of renovations to the ventilation system of their indoor firing range, lead (7439921) exposures were measured during handgun qualifying sessions. Each qualifying session of firing consisted of 60 rounds fired in 10 to 12 minutes. Personal breathing zone air samples were taken from three shooters and the range officer. Lead exposure concentrations measured were 2073, 1786, 172, and 142 micrograms of lead per cubic meter of air (microg/m3). Eight hour time weighted average concentrations were calculated to be 194, 167, 101, and 13microg/m3, respectively. The three shooters were therefore overexposed to lead. Bulk sampling of the sand from the bullet trap indicated it to be contaminated, containing 41% lead by weight. The authors concluded that a health hazard existed from exposure to lead. The authors recommended changes to improve the ventilation system. Following modification of the system, tests were again conducted and 11 of the 12 samples taken were below the limits of detection for the method used. The authors conclude that after modification, a hazard did not exist during qualifying sessions. The authors recommend specific measures to protect personnel from exposure to lead.
(Click to show less) (Click to open report)
(1989) Blue Range Engineering Co., Butte, Montana. (Click to open report) In response to a request from the Blue Range Engineering Company (SIC-1041), Butte, Montana, an evaluation was undertaken of employee exposure to lead (7439921) in the fire assay operations. One stage in fire assay involved separating noble metals in ore samples from lead in a process called cupelation. An 8 hour time weighted average lead concentration of 170 micrograms/cubic meter of air (microg/m3) was noted for the personal breathing zone sample for the assayist, which exceeded the limit of ... (Click to show more)In response to a request from the Blue Range Engineering Company (SIC-1041), Butte, Montana, an evaluation was undertaken of employee exposure to lead (7439921) in the fire assay operations. One stage in fire assay involved separating noble metals in ore samples from lead in a process called cupelation. An 8 hour time weighted average lead concentration of 170 micrograms/cubic meter of air (microg/m3) was noted for the personal breathing zone sample for the assayist, which exceeded the limit of 50microg/m3 recommended by OSHA. The actual exposure may have been less since the employee was wearing respiratory protection. The result of area air sample analysis indicated that no other metals were present in significant amounts when compared to their environmental criteria. A medical survey indicated that workers were experiencing increased frequencies and intensities of symptoms consistent with lead poisoning compared to nonassay laboratory workers. Blood lead levels were significantly higher in assay laboratory workers than in other workers; one of two assay laboratory workers had a blood lead level above 50 micrograms/deciliter. The authors conclude that a potential for lead exposure did exist at the time of the study and provide recommendations for lowering this exposure.
(Click to show less) (Click to open report)
(1989) Blue Range Mining Company, Lewistown, Montana. (Click to open report) In response to a request from the Blue Range Mining Company (SIC- 1041), Lewistown, Montana, an investigation was made of possible employee exposures to lead (7439921) in the fire assay process used to separate noble metals from their ores using dry reagents and heat. An 8 hour time weighted average (TWA) lead concentration of 850 micrograms/cubic meter of air (microg/m3) was noted in the personal breathing zone sample for the assayist, which was above the Mine Safety and Health Administration (... (Click to show more)In response to a request from the Blue Range Mining Company (SIC- 1041), Lewistown, Montana, an investigation was made of possible employee exposures to lead (7439921) in the fire assay process used to separate noble metals from their ores using dry reagents and heat. An 8 hour time weighted average (TWA) lead concentration of 850 micrograms/cubic meter of air (microg/m3) was noted in the personal breathing zone sample for the assayist, which was above the Mine Safety and Health Administration (MSHA) standard of 150microg/m3 at an 8 hour TWA. The employees in the assay laboratory reported an increased frequency and intensity of symptoms consistent with lead poisoning compared with nonassay laboratory employees. One of the four laboratory employees had a blood lead level of 50 micrograms/deciliter, which was above the OSHA action level of 30microg/m3. The mean free erythrocyte protoporphyrin levels were significantly higher among the assay laboratory employees compared to other employees. The authors conclude that a hazard did exist during the fire assay operations. Recommendations to management on measures to reduce this exposure are provided.
(Click to show less) (Click to open report)