CDC logo
Safer Healthier People
CDC Home CDC Search CDC Health Topics A-Z
NIOSH - National Institute for Occupational Safety and Health

Skip navigation links Search NIOSH  |  NIOSH Home  |  NIOSH Topics  |  Site Index  |  Databases and Information Resources  |  NIOSH Products  |  Contact Us

Search for NIOSH Publications: NIOSHTIC-2

NIOSHTIC-2 Search Results

      Advanced Search  |  Help  |  About  |  Feedback 
Terms: 20023199
1 - 1 of 1 Bibliographic entries
All record(s) shown.
Save All   |   Save Page
View Saved    |    Download
Select check boxes to automatically save entries, or use 'save all' or 'save page' links above.
Back to Results
Development of colorimetric indicators: a new technique to determine glutaraldehyde and alkaline glutaraldehyde contamination.
Authors
Vo-E
Source
Proceedings of the International Conference on Occupational and Environmental Exposures of Skin to Chemicals: Science & Policy, Arlington, VA, September 8-11, 2002. Morgantown, WV: National Institute for Occupational Safety and Health, 2002 Sep; :5
Link
http://www.cdc.gov/niosh/topics/skin/conference/s4p5.html 
NIOSHTIC No.
20023199 
Abstract
The aim of the study was to develop a new indicator sensor pad for detection of glutaraldehyde permeation of chemical protective gloves. The pad carries a reagent which responds to glutaraldehyde contaminant by producing a color change. Some commonly used glutaraldehyde and alkaline glutaraldehyde solutions, Metricide, Cetylcide-G, and 50% glutaraldehyde solution, were analyzed by solvent desorption and gas chromatography. All glutaraldehyde solutions exhibited >98% adsorption on the pads over the spiking range 0.05-5.0 µL. Recovery for each glutaraldehyde solution was calculated, ranging from 58-92% (RSD =4.0%) for all glutaraldehyde solutions. Breakthrough times for two protective glove materials (PVC and polymerized alkene) were determined using the Thermo-Hand Method, and found to range from 76 to 150 min for Metricide, from 170 to 230 min for Cetylcide-G, and from 232 to 300 min for 50% glutaraldehyde. The quantitative mass of the glutaraldehyde solutions on the pads at the time of breakthrough detection ranged from 35-37, 37-39, and 38-40 µg/cm² for Metricide, Cetylcide-G, and 50% glutaraldehyde, respectively. The new aldehyde indicator pad should find utility in detecting, collecting, and quantitative analyzing glutaraldehyde and alkaline glutaraldehyde permeation samples in the workplace.
Keywords
Gloves; Protective-clothing; Protective-equipment; Personal-protection; Personal-protective-equipment; Solvents; Gas-chromatography; Quantitative-analysis
CAS No.
111-30-8
Publication Date
20020908
Document Type
Abstract; Conference/Symposia Proceedings
Fiscal Year
2002
NTIS Accession No.
NTIS Price
NIOSH Division
NPPTL
Priority Area
Disease and Injury: Allergic and Irritant Dermatitis; Research Tools and Approaches: Control Technology and Personal Protective Equipment
Source Name
Proceedings of the International Conference on Occupational and Environmental Exposures of Skin to Chemicals: Science & Policy, Arlington, VA, September 8-11, 2002
State
PA
Page 1 of 1
All record(s) shown.

File Formats Help:

Adobe PDF file
How do I view different file formats (PDF, DOC, PPT, MPEG) on this site?double arrows.