CDC logoSafer Healthier People CDC HomeCDC SearchCDC Health Topics A-Z
NIOSH - National Institute for Occupational Safety and Health

Skip navigation links Search NIOSH  |  NIOSH Home  |  NIOSH Topics  |  Site Index  |  Databases and Information Resources  |  NIOSH Products  |  Contact Us

Search for NIOSH Publications: NIOSHTIC-2

NIOSHTIC-2 Search Results
      Advanced Search  |  Help  |  About  |  Feedback 
Terms: 20029023 1 - 1 of 1 Bibliographic entries All record(s) shown.
Save All   |   Save Page View Saved    |    Download
Select check boxes to automatically save entries, or use 'save all' or 'save page' links above.

 1 Estimation of the transmissibility of anti-vibration gloves when used with specific tools
Authors Dong-RG; Welcome-DE; McDowell-TW; Rakheja-S 
Source Noise Vib Worldw 2005 Oct; 36(9):11-20 
Link http://www.ingentaconnect.com/content/mscp/nvww 
NIOSHTIC No. 20029023 
AbstractAnti-vibration gloves are increasingly being used as personal protective equipment to help reduce the hazards of hand-transmitted vibration. A vibration transfer function method for estimating the tool-specific performance of anti-vibration gloves has been proposed to help select appropriate gloves for particular tools and to assess the potential risks posed by tool vibration. This study evaluates the validity of the method by comparing the predicted vibration transmissibility with the measured value. Two typical vibration-attenuating gloves (air-bladder and visco-elastic material gloves) were used in the study. Two series of experiments were performed for the evaluation. In the first series, the isolation efficiency of selected anti-vibration gloves was evaluated in the laboratory under synthesized handle vibration spectra of six different tools. The second series of tests involved the measurement of the glove transmissibility while operating two different pneumatic chipping hammers. The results of the study show reasonably good agreements between the predicted and measured acceleration transmissibility values of the candidate gloves. It is thus concluded that the transfer function method provides a reasonably good estimate of vibration attenuation performance of gloves for specific tools. 
KeywordsVibration; Vibration-exposure; Gloves; Tools; Hand-tools; Personal-protective-equipment; Vibration-control; Risk-factors; Risk-analysis 
Page 1 of 1
All record(s) shown.